How To Choose SMT Feeder?

I. According to the type and model of the SMT machine to choose.

1. Feeder type: Feeder can be divided into paper belt and tape Feeder. The difference is that the paper bag feeder has a needle. The tape feeder has no needle and only a belt guide.

2. Feeder model: generally divided into 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, etc., we choose the appropriate Feeder according to the needs of components.

3. Type of mount machine: high speed mount machine, universal mount machine, electric mount machine; 

Discriminant methods: high-speed veneer feeder without catheter, universal veneer feeder with catheter, electric veneer veneer feeder.

II. The hole position identification of the SMT

1. The position of the flying hole of the mount machine refers to the distance between the two points of the outer ring of the flying gear, which is 2mm and 4mm respectively. The spacing of 4mm is suitable for materials with specifications greater than or equal to 0603. However, the 2mm pitch is only suitable for 0402 specification materials.2. Label identification of Feeder: the label is marked with the model number and number of Feeder. For example, MV8 4 -- 0001: MV refers to the arrival of high-speed SMT machine; 84 refers to the specifications of the placing machine, where 8 represents the packing width of the material and 4 represents the distance between the materials of the placing machine. 0001 represents the serial number of the mount machine.

Leaderway Provides used SMT equipment(Fuji/Juki/Samsung), SMT spare parts(SMT Feeder/Nozzle/Board/Motor/Head and feeder spare parts...etc

Leaderway Industrial Co.,Ltd
Email: wendy@leadersmt.com